How to connect chains to chainsaws?

Chainsaws aren’t only for woodcutters. Today, we’ll talk about how to install chainsaws with a chain.

We will look at the root causes and the most effective solution.

Power tools were a revolutionary invention. They reduced manpower and added additional mechanisms and power to execute demanding tasks such as cutting and pruning. They are a necessity for both professionals and households.

Everyone knows how important it is to have power tools available for general tasks.

Chainsaws are a common staple in the power tools range. They are a great source of energy and speed which makes it simple to trim and cut. Chainsaws are an integral component, so we at Pro Tool Advisor can help you with any problems.

Reasons for the Chain Causing Issues

Before we begin the step-by-step guide to how to put the chain back onto a chainsaw saw we will briefly discuss what may cause the chain to drop or make it stretch. If you don’t know your power tool’s full dynamics and how it works, fixing it could be a challenge.

There are many common reasons that your chain may be experiencing difficulties.

Overheating may result from continued usage. The length of the chain can increase if it heats up. It eventually comes out of the bar.

After the chain was running for a while and you didn’t tighten it. This releases the chain.

The chain can break off if a piece wood is trapped in it when you’re cutting.

The chain is fixed to the saw bar using screws. These screws can become loose and the chain may fall off if they fail to keep it in place.

However, no matter what reason, we are going to make sure that you understand how to place the chain onto an electric saw.

How to Install the Chain Back on a Chainsaw

The preparations prior to starting

Safety must be the primary concern before we start. Safety gloves and complete sleeves are required. For preparing your chain, find an area that is large and free of obstructions.

It is essential to store chainsaw’s parts in a proper manner. It is possible to cause damage to the chainsaw’s parts if you give away any vital components. You can use paper or cardboard to keep the tools and parts that you are taking. This will help ensure that the parts do not get lost. The chainsaw has to be turned off with the safety cover securely locked.

Set the chainsaw’s engine towards you, and the blade’s tips away from you. Take a half-inch wrench, an hammer of medium-range and an incline. Finally, don’t forget oil or a brush to clean and greasing. Let’s now get to work. Find out how to attach the chain to a chainsaw.

Step-by-Step Instructions for How to Put a Chain On An Electric Chainsaw

We’ve simplified the process. Follow these steps to finish this task as an professional.

Step 1: Withdraw the Housing and Bar Screws

With the help of the wrench, loosen all bar nuts, both on the upper and lower sides of the sawchain. To slacken the tension screw and release the tension on the bar, make use of the end that is slotted of the wrench. After you’re done, pull off your bar nuts and the housing made of plastic.

Step 2 Tidy up the Chain and Bar.

After taking the chain off and removing the plastic hatch cover It’s time to wash your chainsaw’s parts. For dust and dirt removal using a paintbrush. Then, use oil to cleanse the components.

You should also make sure you grease the chain before you place it back on the saw.

Step 3. Re-assigning the Chain To the Bay

Now comes the critical part of connecting a new cable to the chainsaw. The chain should be aligned to the grooves of the bar, and then fix it to the sprocket. Be aware that the tension stud should remain in line with the hole that guides it.

You can adjust the tension by moving the chain. Don’t go over or under tension. After that, you can place the plastic wrap back in its place and make sure you tighten the nuts and screws by hand.

Before you begin tightening the saw chain and attaching it, be sure that you’ve tested the tension. You can adjust the tension screws according to your preference if needed.

Make sure to use your wrench for tightening the nuts and screws. This will make sure that you don’t face any operational obstacles when you finish your work.

Step 4: A Few Functional Tests Are Necessary

Before you start using the chainsaw, conduct a few test checks. You’ll be able see any loose ends and then tie them up. Be aware of any chain tearing or popping out. After the test is complete then turn on the chainsaw. Turn it off and increase the speed.

Shut off the switch, and then examine the tension. If it is tight the way you set it in the first place, you can proceed with your work. If it appears that the chain is sagging or comes off, adjust it again and continue the functional test until the chain sits securely.

The chain can be lifted as high as one quarter inch so that it can be steered effortlessly and you can perform your work.

Final words

You should ensure the maintenance of your chainsaw in return. You will be able to use your chainsaw more effectively and smoothly now that you have the skills to fix it.